Connector and part images
- Use a flat background, ideally cardboard/white paper
- Ensure the lighting is good. Use a flash if in direct sunlight to ensure there are no dark shaded areas
- Position the part centrally in the image
- Get close so that the part fills as much of the image as possible. The camera's macro setting is great for this
- Take several pictures from different angles
- For parts, include any packaging you have so we know what brand the part is
- For connectors, include a back face showing the wires and a front face including the pins
- No advertising, such as images including a business logo
See some examples for a Connector and a Part.
Male Splice connector P/N: 6409-0073
Female Header P/N: 6400-0014
Crimp Pin P/N: 8240-4828
Available at https://www.automotiveconnectors.com/