Connector and part images
- Use a flat background, ideally cardboard/white paper
- Ensure the lighting is good. Use a flash if in direct sunlight to ensure there are no dark shaded areas
- Position the part centrally in the image
- Get close so that the part fills as much of the image as possible. The camera's macro setting is great for this
- Take several pictures from different angles
- For parts, include any packaging you have so we know what brand the part is
- For connectors, include a back face showing the wires and a front face including the pins
- No advertising, such as images including a business logo
See some examples for a Connector and a Part.
ID= 30 mm
OD= 62.0 mm
Width= 23 mm
Double Race (2 sets of ball bearings)
Landrover Part No: ERR 5285
Bearing Number: 3206 A 2RS TN
You can buy this bearing at most decent bearing/vehicle parts suppliers.
Landrover quoted me about $100 for the bearing, but the bearing only actually costs about $12.