Connector and part images
- Use a flat background, ideally cardboard/white paper
- Ensure the lighting is good. Use a flash if in direct sunlight to ensure there are no dark shaded areas
- Position the part centrally in the image
- Get close so that the part fills as much of the image as possible. The camera's macro setting is great for this
- Take several pictures from different angles
- For parts, include any packaging you have so we know what brand the part is
- For connectors, include a back face showing the wires and a front face including the pins
- No advertising, such as images including a business logo
See some examples for a Connector and a Part.
8230-4272 for 0.3 - 0.5mm2 cable
8230-4282 for 0.5 - 1.25 mm2 cable